http://sites.garmin.com/fenix/?lang=it&country=IT#begin
https://buy.garmin.com/shop/shop.do?cID=447&pID=107272
Dipende da cosa fai di più e da come preferisci lo strumento, il fenix è stato creato per chi fa escursionismo, con funzioni e un modo d'uso più adatto a questo tipo di attività. Come ha già detto muntagnin nn c'è la possibilità di personalizzare i campi e può essere usato anche come orologio di tutti i giorniiacy ha scritto:Per cui, se si volesse un oggetto multi-uso, da sfruttare sia per alpinismo-escursionismo che per la corsa, su quale tra il garmin e il suunto si dovrebbe propendere? Perchè ho letto che anche il fenix dovrebbe essere compatibile con la fascia cardio...
Sempre il rappresentante mi ha confermato la compatibilità con gli accessori Garmin come fascia cardio e sensore di cadenza.iacy ha scritto:Per cui, se si volesse un oggetto multi-uso, da sfruttare sia per alpinismo-escursionismo che per la corsa, su quale tra il garmin e il suunto si dovrebbe propendere? Perchè ho letto che anche il fenix dovrebbe essere compatibile con la fascia cardio...
La nota e' un po' datata, volevo capire se con le release successive di firmware hanno migliorato, in particolare:Brian on January 27, 2014 at 12:17
...
- I have autolap enabled on my watch for both vibration/audible alerts, however there was no audio/vibration alert when each phase of the workout transitioned to the next phase (i.e. lap 1 to 2, warmup to interval, etc). With the workouts feature on my Forerunner 405, there is a “countdown” beep series that lets you know audibly that you’re moving to the next phase of the workout. Without this audible (or vibration) alert, there is no way to know when you’re finishing/starting a new section of the workout without staring at the watch face for the entirety.
- Similar to the above, despite having autolap set at vibration/audio, and I have “Message Notifications” set to vibrate only. Yet, when I was in the section of the workout that required a specific metric (i.e. a certain pace, or a certain HR), there was only a very light-sounding beep to indicate I was over/under where I should be on that metric. I am not sure where I would specify the type of alert this would be, on my Forerunner 405 it would indicate over/under with a distinct series of beeps for over, and a different series for under…in addition to displaying on the watch face. The Fenix only beeps and displays on the watch face, but I would like to at least be able to change that to vibration too, since the beep is so very slight as to be inaudible.
...